Xanthia Installtion and issues there included

Topic:	Xanthia Installtion and issues there included
jonasy Freshman Posts: 47 Posted: 3.Dec 2003 - 21:35	I am having a similar issue. I did activate the theme but I can not preview them. When I try to use the theme in settings it just gives me a blank white screen and I have to do the old rename that theme folder trick to correct it. See this thread http://forums.postnu…e=viewtopic&t=20136 I went through and did what you described above. The problem I am no expereincing is that I had to remove all of my themes and reinstall. It will not let me remove them and then reinitialize them so when I try to view the templatees I get this error: Xanthia has encountered a fatal error in Zone: master A required Zone template was either not found or failed to load. Also when I look in the active column it reads O for all themes. This does not seem right. I am thinking that I need to remove these theme tables from the DB but I am not sure how to locate them. Thoughts on this?
markwest Moderator Posts: 7720 Posted: 3.Dec 2003 - 21:38	You don't need to remove the themes to remove Xanthia. Simply removing the module from the modules admin panel will remove all tables assoicated with the theme engine. Then try the new pninit.php I mentioned in the other thread and re-initiailse. -Mark
jonasy Freshman Posts: 47 Posted: 3.Dec 2003 - 22:35	Ok once that was completed I noticed that my pnrender module had been inactivated. Since I know I had it active I decided it would be best to remove it and regenerate. When I tried to initialize it I got this error: Fatal error: Call to undefined function: pntemp_install() in /homepages/33/d87458385/htdocs/modules/pnRender/pninit.php on line 56 So I wnet to the CVS site and grabbed all of the updates and installed them. I am still getting that error. Thank you for your understanding.
markwest Moderator Posts: 7720 Posted: 3.Dec 2003 - 22:37	To install pnRender properly you need the install directory that comes with XTE. Get that from the origianal XTE archive as this has not changed, -Mark
jonasy Freshman Posts: 47 Posted: 3.Dec 2003 - 22:42	LOL You are right. Once I loaded the file up in my PHP editor I caught the reference and have done that. It is an active module again. However I am relatively back to where I started. When I view the tehmes that I reinstalled into the themes directory They are still present as if I had already initialized them. Active reads 0 and it lists out edit remove reload etc. When I hit view theme i get the following message : Xanthia has encountered a fatal error in Zone: master A required Zone template was either not found or failed to load. I guess I am really starting to learn. Thanks again for the help Mark.
jonasy Freshman Posts: 47 Posted: 3.Dec 2003 - 22:45	Additional Info: When I hit the remove theme link It says it has been removed but still persists in the view themes view for xanthia.
markwest Moderator Posts: 7720 Posted: 3.Dec 2003 - 23:13	Can you provide me with an admin account on your site and ftp access to the file system so I can see what's happening. -Mark
jonasy Freshman Posts: 47 Posted: 3.Dec 2003 - 23:28	Mark check your PM!
markwest Moderator Posts: 7720 Posted: 4.Dec 2003 - 00:00	I've had a quick look at your site and think I see the problem. You've updated pnadmin.php from CVS but not updated the template that with it. I'd fixed an ML issue in the view function but it needed an updated template as well. Drop that into the Xanthia templates and that should fix the problem. -Mark
jonasy Freshman Posts: 47 Posted: 4.Dec 2003 - 00:04	Mark I saved it as an HTML file and dropped it in no I can initialize the themes. A question. Once initialized if I click on that themes view them link I just get a Blank Page. Is this correct?
markwest Moderator Posts: 7720 Posted: 4.Dec 2003 - 00:06	Edited - I think this ended up in the wrong thread.... ;) -Mark
jonasy Freshman Posts: 47 Posted: 4.Dec 2003 - 00:20	Thanx. I actually figured it out and was editing the post when you answerd me. Can you look at the revised message as it contains a new question.
jonasy Freshman Posts: 47 Posted: 4.Dec 2003 - 00:36	LOL I am sure we are keeping you very busy.
markwest Moderator Posts: 7720 Posted: 4.Dec 2003 - 00:48	No that's not correct (obviously....). Check the permissions on the compile and cache directories. Is the FTP access you set me up with still working. -Mark
jonasy Freshman Posts: 47 Posted: 4.Dec 2003 - 01:21	The permissions are good to go and yes the ftp access is still good.
markwest Moderator Posts: 7720 Posted: 4.Dec 2003 - 02:25	jonasy, I have a look in and everything looks ok. I've tried a few basic diagnostics so far nothing i've not come up with anything concrete. I've run out of time for this evening so will continue to have a look tomorrow. Sorry. ;) -Mark
phpnut Developer Posts: 269 Posted: 4.Dec 2003 - 02:49	jonasy, If you would like to PM me the info needed to access the site I will have a look at things while Mark is away. Thanks, Larry E. Masters Xanthia Theme Engine Developer PostNuke Development Team -- Larry E. Masters
markwest Moderator Posts: 7720 Posted: 4.Dec 2003 - 04:50	Larry, That would be good if you could take this one over. I've got a couple of meetings at work tomorrow and will then be off on holiday on friday. Thanks. -Mark
jonasy Freshman Posts: 47 Posted: 4.Dec 2003 - 08:03	PHPNUT Check your PM
jonasy Freshman Posts: 47 Posted: 4.Dec 2003 - 17:05	I was just curious if you guys had found anything new. I worked on it some more this morning but have run out of ideas.
jonasy Freshman Posts: 47 Posted: 4.Dec 2003 - 17:10	Would yiou guys mind moving this to the new XTE support forum? I hate to keep you jumping all over the place
jonasy Freshman Posts: 47 Posted: 5.Dec 2003 - 16:52	Have either of you had a chance to look at this problem the last couple of days
jonasy Freshman Posts: 47 Posted: 8.Dec 2003 - 19:03	Just wanted to bring this to the top for a wonderful monday. Still having issues here if you guys get time. I also noticed that when I hit the create new block button that it is not working now.
jonasy Freshman Posts: 47 Posted: 9.Dec 2003 - 17:39	phpnut I answered the message you sent last evening. Thank you for your assistance.
jonasy Freshman Posts: 47 Posted: 12.Dec 2003 - 08:34	Just looking for an update.
CliffT Professional Posts: 672 Posted: 13.Mar 2004 - 09:14	Hmmm, OK what happened here guys? I'm having the same problem. Any ideas appreciated! Thanks!