Start ::
PostNuke 0.7 Support ::
XTE Support ::
Xanthia theme sticking to one page only
Moderated by: Support Team
Xanthia theme sticking to one page only
-
- rank:
-
Freshman
- registered:
- February 2004
- Status:
- offline
- last visit:
- 07.04.05
- Posts:
- 26
Hey guys, I am having a problem with the xanthia theme system. I have installed it on my site but it will not move from the frontpage. I can click any where even on the admin link and it will not move. Can someone help please? I have .726 PostNuke. You can take a look here http://216.126.89.22/park -
- rank:
-
Steering Committee
- registered:
- April 2002
- Status:
- offline
- last visit:
- 01.07.08
- Posts:
- 713
Your page looks correct -- I do not understand your problem... -
- rank:
-
Freshman
- registered:
- February 2004
- Status:
- offline
- last visit:
- 07.04.05
- Posts:
- 26
Ok Check it now..........I just changed to the Xanthia theme. Same problem -
- rank:
-
Steering Committee
- registered:
- December 2002
- Status:
- offline
- last visit:
- 14.08.08
- Posts:
- 13407
Your centre blocks still appear - but underneath that is your content - it is there... (if thats what you meant)
-----
Regards,
Simon
itbegins.co.uk - Zikula Consulting
Please read the Support Guide -
- rank:
-
Freshman
- registered:
- February 2004
- Status:
- offline
- last visit:
- 07.04.05
- Posts:
- 26
Yes Exactly....... What can I do to fix that. Thank you for your help
http://216.126.89.22/park
Chris -
- rank:
-
Moderator
- registered:
- March 2002
- Status:
- offline
- last visit:
- 23.07.08
- Posts:
- 7719
Chris,
What your seeing here is a change in the way block placement funtions in XTE compared to legacy themes. If you take a little time to look at the Xanthia admin panel you'll see a block control option; here you can remove blocks from certain modules, change thier placement etc.
In addtion in the Xanthia configuration you can enable visual block administration (vba). This option allows you to control block placement as you navigate your site.
Take a look through the latest documentation. This updated documentation will come with RC3.
-Mark -
- rank:
-
Steering Committee
- registered:
- August 2002
- Status:
- offline
- last visit:
- 03.03.08
- Posts:
- 1221
I'm not sure if it was covered before, maybe it was but can we make it so when we add a theme, it doesn't add all blocks to all mods ? For my part, when I add a new theme, I remove most of the right blocks with a query or 2 in my phpMyAdmin or Access. Removing them one by one, module by module is kind of soporiphic.
Asides that, mine is working great and I am finally getting the grip on it and very happy with it (Already removed all my legacy themes).
-----
Chestnut !
Support via Private message won't be answered...
http://dev.pnconcept.com
http://www.postnuke-france.org -
- rank:
-
Steering Committee
- registered:
- December 2002
- Status:
- offline
- last visit:
- 14.08.08
- Posts:
- 13407
I think a remove all was suggested for blocks, but I dont know if it ever made it into the release...
-----
Regards,
Simon
itbegins.co.uk - Zikula Consulting
Please read the Support Guide
Start ::
PostNuke 0.7 Support ::
XTE Support ::
Xanthia theme sticking to one page only
|
